A Guide to Planning a Do-It-yourself Plumbing Project 

Year after year, the plumbing, sewers and drains of a home perform their daily tasks faithfully. However, the constant use of these systems will result in common plumbing problems. Sooner or later, the homeowner will need to do some plumbing repair. Some homeowners usually avoid plumbing chores as they see them as messy and difficult. This spurs them to seek the services of a plumber, incurring costs on small problems that they can easily handle by themselves. Others take on complex plumbing jobs, leading to disastrous results. Below is a guide to planning DIY plumbing projects.


Armed with the necessary knowledge, it is possible for a homeowner to determine the projects he/she can comfortably handle and those that are best left to professionals. Often, any exposed plumbing that is not hidden inside walls can easily be worked on by a handy person with no special skills or knowledge. Taps and faucets can be unclogged, dismantled and replaced or repaired using inexpensive tools. Trips made to a hardware store to buy replacement parts are often more time consuming than the plumbing chore itself.


DIY plumbing becomes more challenging if the fixtures become heftier and more complex. A bathroom sink can quickly and easily be replaced, but a kitchen sink is a bigger job given the mass of plumbing below it. Partially hidden plumbing and fittings like a shower faucet and its supply lines can require skills like tiling and carpentry. Anytime a homeowner installs a plumbing fixture that was not there before, or has to run new pipes, he or she enters a new area. Any new plumbing should conform to the necessary codes and undergo inspection by a local building department.


woman DIYWhen getting the DIY plumbing work is done, the most difficult part does not involve the actual plumbing. It is all about dealing with the obstacles that may occur. The home owner may be forced to squeeze inside cramped quarters. It is advisable to use a drop cloth, a kneeling pad or even an old pillow to ensure that the worksite is as comfortable as possible. A work light or flashlight should be put in position to see clearly. A basic rule for most plumbing projects is to shut off the water supply. One should then test to ensure that the water is off. Keeping a bucket and old towels in handy is recommended as it can help catch any small amounts of water dribbling out of pipes.


Some building inspectors may require that a homeowner obtains a permit for any installation, irrespective of how small. Others may not conduct an inspection unless a certain installation has to be fitted with new pipes. To be on the safe side, a homeowner should consult with a local building department prior to tackling any DIY plumbing project. An inspector can offer valuable advice on some complex connections like solving problems of water pressure or connecting electric, water or gas lines to a water heater. However, if the plumbing is too complicated for the homeowner to understand, then he or she should not hesitate to call a plumber. So if your looking for an emergency plumber in Aberdeen check out these guys they are very professional their promo video is below.

| Posted in DIY plumbing | Comments Off on A Guide to Planning a Do-It-yourself Plumbing Project 

What Are The Factors That Mean You Must Hire A Plumber

Residential or commercial plumbing system is an important facility that must be working perfectly every time. It does not deserve to be ignored because if you do so, it will be like attracting a regrettable mess. There is no need of repairing an entire plumbing system when a simple fix can correct the time bomb and thus saving you from unexpected cost in near future. In some cases, you may apply Do it yourself idea to repair a problem with the plumbing system but it may come a time when you ought to hire a plumber because you have no option. If you have no clue about the damaged plumbing system, it is best to hire professional plumbers.

How then do you know that you can’t handle a specific problem? Here are some of the various plumbing system faults that may force you to call a plumber.

Clogged Drainage

Drainpipe blockage is one of the commonest plumbing systems problems in every household. Imagine a scenario whereby debris has blocked the piping system which leads waste to a septic tank! The entire environment will be nothing less than odor. Here, you will have to hire a plumber who understands how to remove the dirt deposits from wherever it is inside the pipes. Or just use a plunger and a lot of elbow grease.

Leaking Water Heater Pipes

The hot water equipment may perfectly supply desirable temperature but beneath the boiler, there could be persistent drops of water. This is an indication that the equipment may be having a leaking problem. It is quite obvious that a layman cannot correct this. One has to hire a plumber who will inspect and recommend whether it needs to be repaired or replaced.

Lack of Hot Water Supply

The main goal of your water heating system is to provide you with warm showers. What if that is not the case? Water heater that does not supply hot water for bath and other places is an indication that it has malfunctioned. Plumbers will investigate to find the root cause and come up with a solution.

Pipe Leaks

Pipe leaks are a problem that is very easy to identify. For example, if there are water pipes in your home attic, formation of brown rings on the ceilings is an indication of water damage. Even though this could also be a sign of a damaged roof, leaking pipes may trigger this scenario too. Plumbers will come to your rescue as they know which approach to use no matter where the pipe is located. Underground pipes can also leak but they know how to deal with that.

Persistent Dripping Taps

This is very common just immediately after the tap. It is a problem with the threading inside the pipe which gives room for water to escape and especially when it is under high pressure. A plumber who has the right tools can correct this minor fault. If you don’t do immediate repair, you will get annoyed when you calculate the total volume of water lost by just mere drops.

The above are some of the many problems that a plumbing system may encounter. Main shut off damage, toilet leaks and faucet problems are also additional problems that may need the intervention of a plumber. If you suspect anything as above, why don’t you hire a plumber right away?


| Posted in DIY plumbing, Plumbing Tips | Comments Off on What Are The Factors That Mean You Must Hire A Plumber

Upgrade Your Central Heating

boiler upgrade  If you are fed up with high gas prices or you own an all-electric house and want to cut on your utility bills, then upgrading your central heating system can be a viable option for you. This kind of equipment can help keep your house warm during the cold winter season and calm during the hot summer season. Newer and energy-efficient systems could end up saving you a lot of money in the long run, if they are properly installed. 

Apart from the savings that you can make with better energy efficiency, many dealers will provide their clients with special offers for entire system replacements, enabling you to save even more money. Tax incentives are also provided by the government for those units that meet the set energy-efficiency criteria, but in most cases, customers will need to install a new system. If your central heating unity is old, it is advisable to replace it. If you have purchased a new home, then you may have to upgrade your central heating sooner rather than later. Some of the older units found in many homes are of poor quality and wrongly installed, leading to low efficiency. Adding the tax savings and dealer incentives available could make it much easier to upgrade your central heating system. 

By adding an energy-efficient heating system to your new home, you will be able to take care of your family’s heating needs and ensure your comfort for many years to come. No matter where you live, a new heating system can last for many years and it can also add value to your property and make it more appealing to potential buyers if you decide to sell it along the way. 

A new heating system offers great flexibility of choosing where to locate your unit. Since heating systems often do not require an outlet to emit exhaust fumes, you can locate your equipment where you might already have openings for emitting exhaust gases. It can also help enhance energy efficiency and minimize installation costs by eradicating the need to carve holes for emitting gases and prevent such holes from potential moisture leaks. 

Since all-electric heating systems do not depend on the burning of flammable gases, they are generally safer. The risk for fire is greatly reduced since there will be no source of ignition and any danger of carbon monoxide accumulation is fully eliminated. If you home makes use of a gas-fueled furnace, you can ensure the safety of your home and family by replacing the unit with a superior model. 

There are many other reasons why it is advisable to upgrade your central heating system. By transmitting all the air around your home via a central unit, you are able to enhance comfort by installing a system to control the level of humidity in your home. And the inclusion of an air filtration unit in your home can help make the air fresher during the spring season when the flowers and trees are flourishing. Given the numerous benefits of upgrading a central heating system, it is worth finding out what your central heating dealer has to offer.


One last piece of advice is if you are going to upgrade your heating system typing a simple search query like”boiler installation Glasgow” into Google will usually yield the strongest and most relevant results. Please ensure you do your due diligence and vet the prospective contractors before they commence work.

| Posted in DIY plumbing, Plumbing Tips | Comments Off on Upgrade Your Central Heating

5 top tips to maintaining your boiler to avoid costly repairs

boiler maintenanceBoilers are often used to keep the house warm during winter seasons. However due to constant use they are prone to faulty leaks that can release of carbon monoxide into the air, or even explode in worse case scenarios. As such, it’s important to keep the boilers regularly maintained so as to avoid such disasters. 

Boiler Maintenance Guidelines

You should have the device checked after every 12-month period to ensure all components are in perfect condition, moreover the technician that one chooses should preferably be registered by CORGI or Council of Registered Gas Installers. The professionals would ensure that your system is structurally complete, and installed properly in such a way that there no clogged pipes. It’s also advisable for homeowners to install a carbon-monoxide detection unit within the house, so as to ensure that there’s no leakage. These components are relatively affordable and would give you the mental peace you’ve always been dreaming of. 

Boiler Pressure

Check the overall pressure of your boiler and ensure that it ranges between 12 lbs. and 15 lbs., if it’s too high then consider calling a technician to rectify the issue before it further expounds. Most pressure gauges have a distinct release valve which can be used to relieve excess pressure from the system, however if you drain up the boiler and pressure still continues rising then contact a specialist for assistance. He may attempt to alternate the regulation knob so as to balance pressure generation.

Boiler Care

You don’t have to always call a technician to check your system, there are some basic preventive measures that can be taken to keep the boiler upbeat and in good form. Always check it regularly to ensure it’s clean and sweep out any dust residues that may be remaining inside, dirt has the potential of clogging your boiler fan and causing unnecessary overheating-which can then lead to fire outbreaks. Any form of clutter should not be left inside the boiler. If you reside in a region with hard-water then consider descaling the boiler at least once per year, this helps in preventing debris buildup. 

Most boilers work by forcing heated water via pipes that are connected to radiators or baseboard convection faucets, nonetheless maintenance is a broad aspect that includes the upkeep of both gas, electric and water heating consoles. Steam boilers often require more attention than other systems due to the need of continually filling the boilers to an appropriate level. 

In addition, examine if there are any leaky inlet valves that may release harmful gases into the atmosphere. These valves are known to leak over time, particularly if one has an older system within their home. When faced with such a situation, you should consider tightening the nuts on either side. If this still doesn’t solve your problem, then flush out the water system and replace your inlet valve unit where necessary. Moving on, if the boiler seems dysfunctional and not supplying heat like before then the cause of this problem may be water trapped inside the system. Grab a sturdy piece of wire and poke it right inside the air-hole, so as to clear up the entire radiator. To prevent sediment buildup, remember to open up the radiator’s drainage valve at least once per month.

| Posted in DIY plumbing, Plumbing Tips | Comments Off on 5 top tips to maintaining your boiler to avoid costly repairs

Top 5 boiler repair tips

Central Heating systems and boilers need occasional support and maintenance to keep functioning with the greatest energy and heating efficiency. Being truly a complex equipment, it has to be handled by a knowledgeable and experienced professional. You should not try to repair the boiler yourself even though you are intimidated by the service/repair costs. In the end, you cannot afford to jeopardize your or your family’s safety. Your skill would be to understand the aspects that effect the boiler restoration costs and find out about methods for keeping the expenses in balance.


Factors influencing expenses of boiler repairs In addition to the exact cause of your boiler’s malfunctioning, the normal items that have a bearing on which the repair may cost are: Time when repair is necessary: Though boiler breakdown will be inconvenient any moment it happens, getting maintenance in the winters could be more expensive. The reason behind it is the upsurge in demand for the heat experts of these months. Boiler age: The old boilers will probably breakdown more often. Moreover, their parts could also not be common. This makes repairing older boilers more expensive.


Kind of boilers: Repairing the extremely advanced modern boilers just like the combi-boiler requires better specialized skills than necessary for the typical boilers. Therefore, it is costlier more often. Your residential location: In the event that you reside in a city center, or perhaps a densely populated and easily located region, the boiler repair expenses will tend to be reasonably priced. Regardless of how costly the restoration is, it really is something you cannot prevent as effectively running boilers have become needed for comfortable living. The only thing that you can do is to make an effort to minimize the repair costs.


boiler repairKeeping the boiler restoration costs down The simplest way of maintaining your boiler repair costs in charge would be to ensure proper servicing of the machine and getting normal servicing performed onto it. At times, these expenses can go high and upset your allowance. Therefore, this is a good idea to get boiler insurance that covers repairs and also replacement costs. One more thing you need to bear in mind is that obtaining timely repairs is definitely easier and less expensive. Often, ignoring little boiler issues results in bigger defects that demand expensive repair/alternative and make you suffer additional time of discomfort. Lastly, once you do have to contact a specialist to check out your boiler system, you need to compare the estimates of some of the local experts. Just a little effort could help you save a whole lot on the boiler restoration costs.

| Posted in DIY plumbing, Plumbing Tips | Comments Off on Top 5 boiler repair tips